X210 2600kv 30amp Racing Drone Kit Adding FPV Telemetry
In the first video, we build the x210 kit mostly as it comes. In this video, we add in telemetry, the camera, and the VTX. There are also some sample settings to add the Taranis for low battery alerts.
x210 Build Video: https://www.youtube.com/watch?v=39i-WUUh_dY
Here are the cameras I suggest:
Foxeer CCD Camera: http://www.banggood.com/Foxeer-HS1177-Sony-600TVL-CCD-2_8MM-IR-Mini-FPV-Camera-5-17v-with-Bracket-p-1047125.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
CMOS Camera: http://www.banggood.com/700TVL-2_8mm-Lens-100-Degree-Wide-Angle-FPV-Camera-NTSC-PAL-p-1044895.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
Eachine ET200R VTX: http://www.banggood.com/Eachine-ET200R-FPV-5_8G-40CH-200mW-Mini-AV-Transmitter-with-RaceBand-p-1022303.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
Scissor Suture things: http://www.banggood.com/Self-Locking-Stainless-Steel-Straight-Curved-Forceps-Medical-Nursing-12_51416cm-p-1056760.html?rmmds=category?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
Get your own x210 kit here:
x210 kit: http://www.banggood.com/Realacc-X210-4mm-Frame-w-F3-6-DOF-Racerstar-BR2205-2600KV-Motor-RS30A-V2-Blheli_S-5X4X3-Prop-p-1078119.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
Taranis: http://www.banggood.com/FrSky-ACCST-Taranis-X9D-PLUS-16CH-2_4GHz-Transmitter-with-X8R-p-952630.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
X4R-SB: http://www.banggood.com/FrSky-X4R-SB-2_4G-316-Channel-ACCST-Telemetry-Receiver-Naked-p-1035549.html?p=6Z050013977120130325&utm_source=youtube&utm_medium=travisgrindal&utm_campaign=BG9624385&utm_content=chengshaoyun
thank u travis! i really wondered how that kit does in real life… and for
that price. Even if u buy another frame its great.
love your Videos man~ keep up the good work.
Hello Travis, be carefull those cameras running on higher voltage…I
burned 2 of them, just because of the noise produced by the escs in the
electric circuit.. I run since then a Bec plus and LC filter to have a
prefect clean picture. ( if you are running for 4S on high throttle the
Amps running in the circuit can go over what the cam can take.. If you
squeeze it to 12 v then you have more room before it burns.. ( and mine is
working perfect on 5v )
Thanks for the video, keep on flying and singing ! :)
Dude! We here in Russia watching the video and your crazy about! Cool! Keep
it up!
How are the dys antennas? I am going to get some this week how they
preform.
why didn’t you use the 12v regulated pad on the pdb for the camera and vtx
supply?
Crazy to read so many people who bluid the same quad at the same moment.
great job, thanks
All flight footage you are showing have been recorded with the Foxeer? Can
you upload a video comparison between the two cameras? I’m really trying to
decide if it is worth upgrading! Thanks!
Your channel is great, I miss all the frame reviews but after a point I bet
you were like “I have a problem”. I am wondering why you didn’t add delay
to your taranis voltage alarms though.
Thanks for the telemetry info.
Bang good just added a bnf and rtf version with the 2300kv motors
thanks for posting.
how do you rate the racerstars now that you can use fpv?
for power, efficiency etc?
cheers
Thanks Travis… thanks to your videos on these x210’s I ordered one these
frames last week to replace one of my old H quads that needs to be retired.
great video as always
Very helpful as usual. I’m going to suggest you stick to song writing and
get a professional to sing them for you. LOL
On My last esc think got to close and negative pad turned brown. I fried
it right? Also got a tiny piece of solder in center of board and can’t get
it off. should I buy a new Matek xt60 pdb?
I did similar thing with esc wires, only i u-turned them in pairs, layed
the loops flat, heat shrinked them and stuck them under the PCB. That way i
have full length esc wires with only about 6cm sticking out to FC and it
looks nice ;)
Hey thanks so much for the video, it’s been critical to me being able to
build this!
I have a question: on the bottom, the nuts that hold the stack together
stick out the bottom.. right wherfe the battery is supposed to lay flat
against the bottom of the quad.
The bolts stick into the battery, which causes 2 problems:
1. it’s really tough to get the battery to sit flush; and
2. If it hits hard, the nuts are going to be pushed into the battery,
possibly puncturing it (and fire!).
How do you deal with these 2 problems?
thanks!
I was thinking about getting this, but people are saying it would be very
dumb to do that and spend more money like 190. what so you think. thanks