Nano / Micro / Mini Quad copter Repair / Upgrade and Motor / Prop Mod / Hack
Pllease Like & SUBSCRIBE
Watch Part TWO : https://www.youtube.com/watch?v=dUGq85Ri1d0
Read Below
My Blog : https://amkdiyprojects.blogspot.com/
I Bought this about a year back and I learned to fly Multi-copters as a beginner using this Moon-top M9911 Nano quad-copter and still it’s the smallest Quad-copter available to the public .
Then after breaking it’s one arm I used straws to build it’s new arms but it didn’t work due to the flexibility of the straws and due to the increase in weight because of the thick wires I used .
But now I got these slightly bigger Motors (6 x 14 mm) and bigger props (45mm) and their Current draw with props on is 500-800 mA at 3.7 volts (from PSU). and while powered from the Quad-copter itself 495 mA . Older,smaller motors draw about 450 mA.
Using two disposable Tongue-Depressors and hot glue, I made it’s frame and the total weight with the battery installed was 20 grams and after breaking off some wood it was 18gram (my weighing scale has an error of 1-2 grams +- and it has “issues” measuring smaller weights). It can hover and fly as you can see in the video but it struggles.
So now,after knowing that it can work I am trying to reduce it’s weight further by making small arm extensions instead of a frame.
Originally it had a weight of around 12.5 grams with the battery installed and I tried to fly it (before I broke it) with a similar, second battery (2.5grams) riding on top of it unconnected and it worked but “not too well” .But it seems now it can fly with a second battery only if I reduce the weight slightly.I’ll post the second video showing the results.
