Hobbymate Sparrow with Hawkeye Firefly HD Cam08:47

Spending some time around the tree tops. The first half of the video is 1080p and the 2nd half is 720p. Enjoy.

Link to the Hawkeye FireFly Micro HD Action camera. This camera records at both 720 and 1080p @ 30fps.

https://amzn.to/2J4Ytr2

In this video I’m flying the Hobbymate Sparrow 145 with a Turbowing TX18011.

Check out my review and break down of the Sparrow.
https://youtu.be/g4DvconmAQQ

You can pick up this kit at Hobbycool.com

http://hobbycool.com/micro-fpv-racing-drone-combo-145mm-bnf-pnp/?afmc=2k

Weight came out to 148grams
Specification:
Frame Size: 145mm
Prop Size: 3.0″
Carbon Fiber bottom plate: 4mm
Carbon Fiber top plate: 1.5mm
Carbon Fiber camera mounting plates: 1.5mm
FC mounting hole size: 30.5×30.5mm
Frame Standoffs: 30mm
Micro Camera
Detachable arms
Frame Weight: 40gm

Configuration:
145 frame kit
Hobbymate F3 aio flight controller w/ vtx
Hobbymate 4in1 esc 20A
Micro fpv camera
3030 Tri-blade prop
Motor option: 1306 Brushless motors / 1406 Motors
Micro receiver optional

Specs for flight controller
Firmware Omnibus v3.17
Integrated with 40 channels switchable power
25mw/200mw/500mw, with on/off switch
Led display the channels and transmitter power
Support Audio and Video input (Audio input works only with cameras with mic)
Onboard 5V/3A BEC
Support 4-in-1 esc, and stand alone esc’s
Support 2-6S (7-24v)power supply
Support buzzer (not included)
Support SBUS/PPM/DSM2/DSMX receivers, support osd
Program by radio control.

Spec:
F3 processor STM32F303CCT6
MPU: MPU6000 Gyro/ACC Sensor
AV transmitter: 25mw/200mw/500mw switchable, 40 Channel (inc.racing band)
OSD firmware: Betaflight OSD
Video camera voltage: any stand by 5V video camera
BEC: 5V/3A output
Led pad ready
Buzzer pad ready
PCB size: 36*36mm
Mounting Hole: 30.5*30.5mm

Specs for ESC
Specification :
Con.Current: 20A
Peak Current(10s): 25A
BEC£º1.5A/5V
Lipo: 2-4s
Weight: 19g
Size(PCB): 36*36mm
Mounting hole: 30.5*30.5mm

Specs for Frame
Specification :
Frame Size: 145mm
Prop Size: 2.0-2.5-3.0¡å
Carbon Fiber bottom plate: 3mm
Carbon Fiber top plate: 1.5mm
Carbon Fiber camera mounting plates: 1.5mm
FC mounting hole size: 30.5×30.5mm
Frame Standoffs: 30mm
FPV Camera Size: Runcam Micro Swift ¨C 19mm width (NOT INCLUDED)
Detachable arms
Frame Weight: 40gm
Suggested Build Parts:(Not included)
Micro F3 F4 flight controller
4in1 esc board 10-30A
Swift FPV camera with VTX
2.0-3.0″ Props
1104, 1105, 1106, 1306, 1407 Brushless motors
Package includes:
1 x Carbon Fiber bottom plate
1 x Carbon Fiber top plate
1 x sets of Alu Screws

Specs for Motors
Brand Name: HOBBYMATE
Item Name: 1306 3100KV Brushless Motor
Option: CW Rotation (Black Spinner Nut) ; CCW Rotation ( Siliver Spinner Nut)
Model: 1306
KV: 3100KV
Voltage: 2-4s Lipo
Motor Weight: 11.3g

Thank you very much for watching.

Remember to Like, Share & Subscribe. You can click the bell for notifications.

If you like my channel and would like to donate to help support future videos you can visit the following links.

https://www.patreon.com/C_Ray_Tech

www.craytechblog.com/shop

What I fly and what I use

BNF Beta85
http://amzn.to/2DLRLEy

BNF Beta75s
http://amzn.to/2EnfnfA

BNF BetaFPV Beta 65
BetaFPV Beta 65 Frame Kit
http://amzn.to/2iFx68l

BetaFPV Flight Controller with Frsky Receiver & BetaFlight OSD
http://amzn.to/2B0QeZ6

BetaFPV Flight Controller with DSMX Receiver & BetaFlight OSD
http://amzn.to/2j1f6cm

BetaFPV Z01 Camera
http://amzn.to/2j4aKBh

BetaFPV 230mah LiHV Batteries
http://amzn.to/2kwVVqY

BetaFPV Replacement Canopies
http://amzn.to/2BewWzT

BNF Beta 75s
http://amzn.to/2zNl0jl

BNF Beta 75
http://amzn.to/2hDXC59

Beta 65s
http://amzn.to/2yMK3Dz

FPV Goggles I use
http://amzn.to/2hEvVc4

Soldering Iron I use
http://amzn.to/2hDYvuv

I film all my videos with the Samsung Note 5
http://amzn.to/2ASPm5P

Thank you very much.

Fly Safe & Fly Often