Eachine H8 Mini high altitude testflight
Setup:
cam: 600tvl 2gram camera 170° lens
Vtx: boscam 200mw 5.8ghz module
Battery: 260mah 1s lipo
Radio: Taranis X9D Plus 2.4Ghz (with DIY Multiprotocol Module and 1Watt signal Booster)
Video Goggles: FatShark Dominator HD V2
Antennas:
Vtx: Cloverleaf Antenna
Vrx: Disc yagi Antenna
RcTx: Quadrifilar Helix Antenna
The AUW (all up weight) is 26g
———————————————————————————————–
Complete Partlist for fpv h8 mini:
quadcopter:
http://www.banggood.com/Eachine-H8-Mini-Headless-Mode-2_4G-4CH-6-Axis-RC-Quadcopter-RTF-p-975808.html
camera :
http://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html
video transmitter:
http://www.banggood.com/FPV-5_8G-200mW-Wireless-Audio-Video-Transmitter-Module-TX5823-p-84780.html
battery:
http://www.banggood.com/Upgrade-Eachine-H8-Mini-H8-3D-Battery-3_7V-260mAh-RC-Quadcopter-Spare-Parts-p-987818.html
Step-Up/Step-Down Voltage Regulator:
https://www.pololu.com/product/2119
Programming adapter (for flashing the custom firmware):
http://www.banggood.com/ST-LINK-V2-Emulator-Downloader-Programmer-Support-STM8-STM32-p-973898.html
Tutorial for flashing the firmware:
http://www.rcgroups.com/forums/showthread.php?t=2512604
Multiprotocol-Modul (to fly it with your normal transmitter):
https://github.com/goebish/nrf24_multipro
2.4ghz 1Watt booster (i know its sold as 2watt booster but i took a look inside and the amplifier chip is only 30dbm = 1Watt):
http://www.banggood.com/FPV-2_4G-2W-2000mW-Mini-Radio-Signal-Booster-For-DJI-Phantom-p-965221.html
Warning: if you use the signal booster make sure to set the multiprotocol modul output power to 80mw (max input power for the booster is 100mw)
———————————————————————————————–
 Eachine H8 Mini){kind=link}
I will try stock flysky set up and 200mw vtx as well
Could I achieve this with flysky ?
I definitely want to try this , I am buying the fs i6s flysky so I will try various micro quad builds and see what set up gets me the best range , for micro quads I prefer the beta fpv 0720 17,500 kv motors they are so powerful with 65mm props and I get 5 min flights with boldclash 450mah 80/160 C charged to a full 4.35 volts with a 200 mw camera , my current micro quads full weight with battery is 44 grams , just need to try and work out the range now I also use the helimax 1sq frame it’s carbonfiber , strongest lights micro frame I know of for 7mm x 20mm motors specifically only
Dose this have acro firmware. ? It’s probably impossible to do this with a stock one huh ? Cause with acro you can literally aim straight down to return to earth & stock firmware you would have to zig zag or come spiraling down or cut the motors completely and try to mange best you can and just tumble down lol
You’re in the UK? You guys are always showing us illiterate American nitwits how do do stuff!
Just Awesome!!!!!.
Thanks for showing how far you can push this little flyer. Awesome! Now I wanna try it 😉
cool what can be done on 200mw isnt it.
heres my flight, specs are in description…
Wow, that was awesome man!!!
Give link on both antennas on quadcopter?
EPIC!
I mounted AKK S2 camera+transmitter+antenna (4.2 g) hooked with a small piece of velcro but with that additional weight the stock battery lasts only 2 minutes and H8 struggles to gain the alititude while without the camera it flies really well. I’ll try with better battery and new propellers when I get them but seems these motors are much weaker than yours.
What about the MOTORS burning out after ~4 dozen flights? Where’s the BUILD on this?
Woow. I hope that you have a tutorial video step for step for dummies.
lol.. that crazy little quad.. next maybe above the cloud
motor 615 used?
is fake
Been higher