At two points during this flight (0:40 and 1:02), there is a strange oscillation and noise. Does anyone have an idea of what the cause/solution for this is? Specs for build below.
*****
Long Range (7″):
iFlight XL7 v4
iFlight 2814 1100kv
HQ 7x4x3 Props
iFlight Succex-E Mini F4 FC & ESC (2-6S)
Foxeer Falkor Mini
TBS Unify Pro32 HV
iFlight 150mm Long Range Antenna
FrSky R9 Mini Receiver
Ovonic 1550mah 100C 6S LiPos
JHE42B_S Finder Beeper
BMC3d Printed Parts
———————————-
GPS/SMA Atenna Mount
https://www.thingiverse.com/thing:3575121
GoPro Mount
https://bmc3d.co/products/iflight-xl7-gopro-session-mount?variant=13016231247916
Immortal T Mount
https://www.thingiverse.com/thing:3471900
#neverstopflying
Related Posts
Dancing in the Mountains: Long-range FPV
Found a new spot to fly. 🙂 Using my custom frame: Nibh if you …
Bebop Drone Fail – Windermere, FL
December 2015 I was flying my Bebop Drone with my Droid Phone. I have …
Montage ampoules à led sur Lotus Elise Rover 2002
Tout est dans le titre. Un simple montage d’ampoules led (format CREE – 4800 …
Updating the Space Cowboy part 2 : Da build (More build info in description)
Few things I forgot to mention – In between the esc and flight controller, …
How to disable 15 meter altitude lock in DJI mini 2
DJI mini 2, 15 meters unlocked. Software used – https://drone-hacks.com/download fake gps – https://play.google.com/store/apps/de…
THE BEST FREE DRONE RACER ? – TDRL HIGH VOLTAGE – QUADCOPTER – DRONE- FPV – RACE – SIMULATOR
We check out this awesome Free to play Drone racing simulator on steam – …
Could be a million different things, but I’d check physical first: loose screws or connections, motor bearings dirty, motor bell dirty, etc. Then move to blackbox, filtering, pid, etc. I’m assuming you can hear it in person and it’s not just a bad mic recording? This is why I’ve started just recording without sound lol
It sounds like Whales ? trying to communicate ??
That’s a wierd one almost seems like prop wash then the sound changed. idk lol
I had a hard time spotting it Spaceman.
Do u hear it when flying? Any adverse effects motors hot?
It definitely sounded weird that one after a minute in wish I knew what that was
Maybe the faa hacking your system
Sounds like a bad prop or loose prop.(Might be over spinning on the motor when you drop throttle) try changing the props First. I can think of a million issues to troubleshoot , but I’m sure you’ve done most of em. Also make sure nothing is touching your FC /gyro etc..
Staceman….seems to happen on the same move…kind of angled down and off the throttle…seems to be a spin down pulse. Does it always happen in that type of throttle down event? It seems like the ESC does not know where it needs to be speed wise.
Yep I agree with another comment…. the FAA is using its new Electro Magnetic Pulse Anti Evil Drone Illudium Q-36 Explosive Space Modulator. They are slowly upping the power, but letting you know they know who you be.
Sounds like some slightly grinding. Weird ?
Sounds like something in the props
That’s a strange one! It seemed to happen at the same point but funny it never happened again during the rest of the flight! Maybe the air intakes sucked in a bug!!? lol
I’d recommend two things, one at a time tho. First, change your PWM Freq to 48KHz in BLHeli. If it persists, check motor timing in Betaflight. It seems to happen at full low stick after a full throttle maneuver. Could be a stall especially spinning 7” props on 1100kv’s. Hope you sort it! **You could also play with motor timing in BLHeli as well.
What is your Min throttle setting?
Sounds like problem I had. It was a loose magnet. Started acting up after a hard crash.
FAA PULSE JAMMER TESTING
I could certainly be wrong but my guess is something with a motor. Like a bad bearing or loose magnet. ?