Most of the FPV quadcopter crashes I had on tape this year- broken props, broken arms, motors flying off in a crazy compilation with slightly changed lyrics.
CyberPilot360©
Most of the FPV quadcopter crashes I had on tape this year- broken props, broken arms, motors flying off in a crazy compilation with slightly changed lyrics.
CyberPilot360©
I just purchased my first inexpensive quad copter. The WL Toys 262 with
Mobius camera. You want to know what’s really sad?? 37 years ago I was
one of those guys in the polyester shirt on the Disco floor.. LOL. Yes, I
was Canton, Ohio’s version of John Travolta.. Damn.. Time sure does fly.. I
don’t remember this song however.. 😉 Safe flying..
It’s probably a little newer 😉 It’s called Le tigre – deceptacon. Have fun
with your quad!
+CyberPilot360 I do have to say. You did a great job with this video. I
guess being an old disco guy makes me chuckle a little more. Safe flying…
If I had all my crashes on video, they would be a couple of hours long if
you put them together…..
hahahaha cool crash .But you there GPS ? If yes you interested good GPS ^_-
Good luck playing your drone
Hum thanks. What do you mean?
my contribution!! You can use the will!! 🙂
Crash drone at night FPV
You seem to do a lot of “landings” while still going forward fast…maybe
you should get wheels…
1
How does almost every single flip ends up on it’s head? I almost always go
down rightside up despite flips n such. You must be very top heavy
Nope just some of the motors stopped
+CyberPilot360 I’ve never experienced a motor fail but I hear people talk
about them like they’re common. From just thinking about it, there are
very few things that can cause a motor to fail in the air: mechanical
failure, electrical failure/ESC. I can’t really come up with any more. Am
I wrong to think those two are very rare?
you are right, a motor stopping in mid air and generally any serious motor
failure is pretty uncommon, the reason why I had so many is because I was
using wrong low quality esc’s. Note that most of the flights were done more
than 2 years ago.
LOL!
yup!
Здравствуйте! Я подготовил перевод видео про аналог GoPro, надеюсь вас
заинтересует! Приглашаю вас на свой канал и блог!
when it flipped over did you check if you were in + or x mode?
lol you wouldn’t even be able to take off if it was in a wrong configuration
no you can but it will flip over. my quad did that twice till i found out
why it did that.
It will flip over once it gets airborne
Really, if I flew that bad, I would quit.
My quad kept randomly flipping like that then I change one of the motors
and its fine now.
some of them are good crashes,,check my channel out and i have some real
bad ones with my x650f,hurts when they come down
Disco is dead fagget.
No I didn’t know that.
Thx
Glad to know I helped
+Gilbert Collie the music starts right away so can clearly know that is
disco.
If you didn’t liked it you could just stoped watching or just mute the
music.
Disco sucks!
+Gilbert Collie well how about using your brain and doing what +Babis
xalkias suggested?
for sure you need a rescue system with parachute
Parachute UAV Drone DJI S1000 – Crash test
I’m curious of what props you were using during those prop failure crashes?
I was using apc slow fly, but the props were good, the problem was with the
rest of my set up
+CyberPilot360
Namely the pilot?
No I don’t think so. It’s wa my esc’s if you know what they are
Ummmm….now let me see? ESC’s? My thats a tough one. Haha. Normally
ESC’s are fine but fail for good. They go open circuit. But yours seem to
flare. Have you tried the PID settings etc? If you know what they are?
Oh snap don’t say that voodoo combination of letters. I’ve heard about them
but never really encountered one live in the open. If you ever capture one
you can use it to tamper with the Soul of the copter?
… the escs were crappy and constantly loosing sync when the fc was giving
a rapid command.
Do you have picture of that PID? I’m curious what it looks like
Flip of dead
well done to whoever was the pilot at 2:45, actually landing when people
came down the path… :)
Nice again!!!!!
But whyyyyy??
55555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555552555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555
find the 2
Im watshing this to feel better, my hubsan 4x hd just broke :, (
sorry for that, I have broken mutch more expensive quads ;D Probably your
quad is even fixable, what’s the issue?
I’ve revived mine several times. I’ve even had to go so far as to buy a
new receiver board for my H107D. I’m sure what you have going on is
entirely fixable.
I’m sorry to say but you can’t fly for shit!
hahaha….
I’m sorry to say but you probably don’t fly anything at all right?
+CyberPilot360 i actually like your videos and channel, but indeed
sometimes it looks like your flying being drunk… especially in this one
🙂
HAHA LOL My quad was crappy 90% of the crashes you see here are because my
ESC’s failed in flight
100000+ views! Nice
my quad is doing that spin thing what is that ?
swapped motors flips to that side now
I would hate to have to buy new esc and motors not even using the first set
+Elio Mella does it take off and then after some time ramdomly flips ? Or
it doesn’t even get airborn? Check your esc’s bullet connectors, there
might be a bad soldering job
it takes off then after some time of giving it throttle into the motor it
will flip. I wouldn’t doubt a bad solder seeing as these were my first
motor solders. also noticed that the motor would have a jittery start up.
should I un solder and re solder with same connectors or clip it and re do
it
Thanks for the help by the way 🙂
Just re-heat the solder on every of the three connectors and make sure it
has melted all the way. That’s typical behavior of a bad connection. Let me
know if that sorts it out
so many flip of deaths
1:10 lol
The corny edit with the perfect song made that very fun to watch! 🙂
Thanks!
+TheLipRipp3r Glad you like it! Unfortunately as you see from the ratings
very few people value this different approach :/
+CyberPilot360 That why I thought I would give ya some props! (pun not
intended) The dog was great and the “my dragon link” part had me rollin!