Took the micro to a lot down the road that is under development. Saw the CAT and just had to do it. I already uploaded the single flight that I took with the 5″, as soon as I was finished with that flight, I took out the 3″ for another three packs.
Had to take advantage of the great day and this lonely caterpillar and great lot.
Full size betaflight FC and PDB from Matek.
Used the iFlight Force motor and esc bundle kit, 24a esc’s and 1407 3500kv screaming motors.
Also used a full size Runcam Owl Plus 2 and 600mw Boscam vtx 🙂
Running 1300mah 4s 120c GNB insane packs, so much scream. Love the sound of the motors, almost as much as my 5″.
Full open acro mode, no failsafes, accelerometer disabled.
https://www.instagram.com/jdogb1_fire…
https://www.airvuz.com/user/fireblade
Quadcopter: Custom build 3″ race quad using iFlight 140mm V3 frame (thicker 4mm lower, also upgraded fasteners and aluminum knurled standoffs)
PDB: RealAcc 5-in-1 3-5s
FC: SP Racing F3 Acro Pro Betaflight
ESC: iPower blheli_32 24A Motors: iFlight 1407 3500kv
FPV Camera: RunCam Owl Plus 2 16:9 140deg 2.1mm
VTX: Boscam 600mw
Batteries: GNB 1300mah 120c 4s
TX: FlySky i6 FPV
Goggles: Eachine EV800D
Antennas: TBS Triumph
DVR Receiver: Eachine RC840
Quad total weight without battery: 238g
Lipo battery weight: 155g (wrapped)
the onboard mic on the runcam is awesome. I could hear you guys chatting away like you were right there. That’s awesome to capture in DVR, for sure. Killer flying as usual.
awesome ?
How’d you get your Duncan audio to work? Mine never seems to product a sound.. nice flying!