π₯ π₯ π₯ π₯ FULL SETUP AND LINKS IN DESCRIPTION BELOW β¬οΈ β¬οΈ β¬οΈ (Click ‘SHOW MORE’ππ» )
Ok so this wasn’t the actual maiden… but the maiden only lasted 3mins before the canopy fell off (my own fault for not securing it properly). I’ll show the footage from this in a build overview video coming up a bit later. This re-maiden went pretty well, but there was some vibration present even after the prop being well balanced so I need to determine the cause of this. It’s a fun plane to fly with the feeling of being in the cockpit and the heat tracking really adds a lot to the experience. I’ve now setup multiple OSD layouts which are switchable in flight and you’ll notice in these clips it’s quite ‘busy’ as it’s my tuning OSD. For a bit of fun I’ve dubbed the sound with real Spitfire engine sounds. 360cam shots on on the ground taken with the Insta360: http://tiny.cc/Insta360oneX
βοΈ ππ» Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee π βΊ http://tiny.cc/BuyAdamGaCoffee
π΅ Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don’t make it to YouTube: https://www.facebook.com/AdamGdoesFPV
π· Follow me on Instagram @adamgdoesfpv βΊ http://tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
β
Banggood βΊ http://tiny.cc/BanggoodFPV
β
RMRC βΊ http://tiny.cc/RMRC
β
HobbyKing βΊ http://tiny.cc/HobbyKing
β
Gearbest βΊ http://tiny.cc/GearBestFPV
========Spitfire Setup========
In the Air:
-Dynam V3 Spitfire PNP βΊ http://tiny.cc/Dynam-Spitfire-v3
-Matek F765 Flight controller (Running iNav) βΊ http://tiny.cc/F765
-Matek Vtx βΊ http://tiny.cc/Matek-1G3-Vtx
-1.3g Video antenna buried in wing βΊ http://tiny.cc/SideFeedAntenna
-TBS Crossfire Nano Rx βΊ http://tiny.cc/TBS-Crossfire-TX16s
-Foxeer FPV Camera βΊ http://tiny.cc/FoxeerT-RexMicro
-180 degree Pan servo (modded for closer to 270 degree) βΊ http://tiny.cc/180panServo
-2.2k resistor to modify servo βΊ http://tiny.cc/2-2kResistors
-Tiny GPS Rx βΊ http://tiny.cc/220GPS
-Metal Gear Aileron, Elevator and Rudder servos βΊ http://tiny.cc/TurnigyMG-9g
-Flaps servos βΊ http://tiny.cc/TG9e
-11×7 APCe Prop βΊ http://tiny.cc/APCe-11×7
-Turnigy 5000mAh 4S 25c βΊ http://tiny.cc/zngv0y
-DJI Osmo Action HD camera βΊ http://tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD βΊ UK Link: http://tiny.cc/SanDiskV30UK – USA Link: http://tiny.cc/SanDiskV30USA
On me:
-Skyzone OLED FPV Goggles (built in head tracker for pan) βΊ http://tiny.cc/Skyzone03O
-TX16s Transmitter βΊ http://tiny.cc/Radiomaster-TX16s
-Crossfire Micro Tx V2 βΊ http://tiny.cc/TBS-Crossfire-TX16s
On my Groundstation:
-K&F Concept Tripod βΊ πΊπΈUSA http://tiny.cc/GS-Tripod-USA π¬π§UK http://tiny.cc/GS-Tripod-UK
-1.2 ghz VAS Pepperbox antenna βΊ http://tiny.cc/6adv0y
-Singularity CP Antenna 1.2g βΊ http://tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx βΊ http://tiny.cc/hbdv0y
-Eachine Diversity Monitor with DVR βΊ http://tiny.cc/ehfv0y
-Diversity Demon βΊ http://tiny.cc/ubdv0y
-DVR βΊ http://tiny.cc/9cdv0y
-Turnigy 5000mAh 3S βΊ http://tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) βΊ http://tiny.cc/cedv0y
-Digital Volt Meter βΊ http://tiny.cc/gfdv0y
========3D Printed Parts========
-Lightweight Pan βΊ Temporarily removed from Thingiverse
-Linkage guards/skids (remixed to be shorter) βΊ https://www.thingiverse.com/thing:480806
========3D Printing Equipment========
-3D Printer βΊ http://tiny.cc/qql96y
-PLA filament βΊ http://tiny.cc/EryonePLA
-TPU filament βΊ http://tiny.cc/SainsmartTPU
-PETG filament βΊ http://tiny.cc/SainsmartPETG
-Digital Calliper βΊ http://tiny.cc/DigitalCalliper
========Build equipment========
-E6000 glue βΊ http://tiny.cc/E6000Glue
-Laminating Iron βΊ http://tiny.cc/LaminatingIron
-Laminate βΊ http://tiny.cc/laminate
-Hot glue gun βΊ http://tiny.cc/HotGlueGun
-Foam Cutting Tool βΊ http://tiny.cc/vxgv0y
-Heat Gun βΊ http://tiny.cc/AdjustableHeatGun2000w
-Watt Meter βΊ http://tiny.cc/WattMeter
-3M90 spray adhesive βΊ http://tiny.cc/3M90adhesive
========Other Video Equipment========
-Macbook Pro βΊ πΊπΈ http://tiny.cc/MacbookPro-USA π¬π§ http://tiny.cc/MacbookPro-UK
-External Hard to Store Final Cut Pro X projects βΊ πΊπΈ http://tiny.cc/Seagate2TB-USA π¬π§ http://tiny.cc/Seagate2TB-UK
-Computer Mic βΊ πΊπΈ http://tiny.cc/AU-GM30-Mic-USA
-DSLR βΊ πΊπΈ http://tiny.cc/CanonDSLR-USA π¬π§ http://tiny.cc/CanonDSLR-UK
-Camera Lens βΊ πΊπΈ http://tiny.cc/Canon50mmLens-USA π¬π§ http://tiny.cc/Canon50mmLens-UK
-Handheld Gimbal for DJI Osmo or GoPro βΊ http://tiny.cc/Handheld-Gimbal
Super fun video; thank you
Nice sound effects, can you dive bomb it like stuka
Most awesome setup and editing. Great the sound job.Β
Only way this video could be topped would be with a wingman flying in formation. Double the sound effects.
haha awesome background sound effect!
Great! Good sound π
looks like new zealand what country are you in
Awesome!!
Amazing. now iv got to buy and build a spitfire even though my house looks like terminal 5 at heathrow.
Cool sounds! π Strong flutter on the wing, the wings need to be strengthened
Cool! My kind of flying in a Spit no less. Love the throaty Merlin sounds!
I want to do like this
Well done mate, you did better than me (very easy to do). I’ve still got to -crash- fly mine again this summer but I doubt I’ll even get it properly airbourne π
Oh it’s Groundhog Day and Oomagooliebird.
He did this exact same setup, it’s amazing…lol…Loved the fly by sound effects, epic..lol…well done mate, next time in the cloud base please…π€π³π³ππ¬π§
That was simply brilliant LOVED the sound effects!
you are a genius, period.
this is absaloutly brilliant thank you. this sort of thing is exactly why I got into the hobby
This @AndyRC video using head tracker and pan/tilt cameras may give you some ideas if choose to attempt formation flights. Details of setup covered in an earlier video. It’s great to see what is possible. Spitfire and this are two of my favourite videos so far in 2021. The pure joy of flight.
Wow that foxeer t-rex looks great, regretting just buying a falkor XD.
Roughly how much flight time do you get with your 5000mAh 4S on this plane with all the fpv gear?
Thanks, inspired!