I’d say that the 5.8GHz VTX is desensitizing your 2.4GHz receiver due to the close proximity of the antennas.
shaneman27
Your noise floor must be crazy low! at 600mw video power I can’t even get half that far without interference on the video. interesting
shadow212222
What motors are those mate?
Brighton Till I Fly
can I ask why the video seems to be tilted slightly to the right?
reezlaw
On banggood they say that the I6 is good for 500m, so I guess 1900 is already an impressive achievement
GrumpyMadman
I think you still have shown that the FlySky radios are still pretty impressive for their price. I assume your fail safe activated? Are you not setup with RSSI with this transmitter/receiver combo? I have a new quad coming but I will not fly it beyond LOS without the fail safe, rssi, and lost model buzzer alarm setup, as I have bad luck and need all the help I can get.
Jimmy Crawford
cool what part of nz r u in im in taupiri just out of hamilton
MrTColson
It was a valiant effort and made for a good watch. Cool video. Peace
Ultra RC
Its a tank water meter, we have one that works on 433MHz
Martin Beyer
try lower p gains on roll
Archimedes Tan
Good day sir! I have this issue where my quad keeps on dropping on the same spot, would you say its a signal interference? or antenna is wrongly placed? I know its not a range issue coz its only like 75 meters away, and if you fly opposite direction it will fly far than the dropping site.
MaEtUgR
The black VTX antenna you’re using is a TBS Triumph, I use them as well and if you ask me they work best in pairs (same antenna on RX). I don’t know how exactly you mounted your RC antenna wires but it matters a lot… hope you didn’t break too much.
Sebastien Boutholeau
I was about to say something regarding carbon fibre / signal blocking but I’m 3 months too late to the punch!
Ace vids boss, do any acro?
Mark Vande Sande
No no your wife has put a 2.4ghz repeater on that tank so you get better range. lol
https://www.banggood.com/KINGKONG-LDARC-110GT-117mm-RC-FPV-Racing-Drone-with-F3-4in1-10A-Blheli_S-25mW-16CH-800TVL-ARF-BNF-p-1151830.html?p=Q8200810215917201704&utm_campaign=FrequentFlyerRC&utm_content=3312 Get a Frequent Flyer RC Color Tee Shirt! : https://amzn.to/2DNOOBI Get the Gemfan …
I’d say that the 5.8GHz VTX is desensitizing your 2.4GHz receiver due to the close proximity of the antennas.
Your noise floor must be crazy low! at 600mw video power I can’t even get half that far without interference on the video. interesting
What motors are those mate?
can I ask why the video seems to be tilted slightly to the right?
On banggood they say that the I6 is good for 500m, so I guess 1900 is already an impressive achievement
I think you still have shown that the FlySky radios are still pretty impressive for their price. I assume your fail safe activated? Are you not setup with RSSI with this transmitter/receiver combo? I have a new quad coming but I will not fly it beyond LOS without the fail safe, rssi, and lost model buzzer alarm setup, as I have bad luck and need all the help I can get.
cool what part of nz r u in im in taupiri just out of hamilton
It was a valiant effort and made for a good watch. Cool video. Peace
Its a tank water meter, we have one that works on 433MHz
try lower p gains on roll
Good day sir! I have this issue where my quad keeps on dropping on the same spot, would you say its a signal interference? or antenna is wrongly placed? I know its not a range issue coz its only like 75 meters away, and if you fly opposite direction it will fly far than the dropping site.
The black VTX antenna you’re using is a TBS Triumph, I use them as well and if you ask me they work best in pairs (same antenna on RX). I don’t know how exactly you mounted your RC antenna wires but it matters a lot… hope you didn’t break too much.
I was about to say something regarding carbon fibre / signal blocking but I’m 3 months too late to the punch!
Ace vids boss, do any acro?
No no your wife has put a 2.4ghz repeater on that tank so you get better range. lol