i hate the fact that his map has Alaska as a different color than the continental US… it makes it worse that they got HAWAII correct.
Mettahall
Me trying to get a girl: 08:39
Ethan Scoma
oh my god why am i just discovering you!?? this is amazng
11ish
you’re hilarious
Madalina Butnariu
this dude did NOT get bored on quarantine.
Rath13x
Did you let the nylon cure? To be printable it needs to be dry but to have more impct resistance/flexibility it needs time to pick up water from the air.
Joel Calhau
I really liked the TPU aproach. I would probably explore that a little more. My idea would be to print the TPU frame but with slots along the arms and then print PLA (because its cheap) or a more rigid filament “flat sticks” to insert in those slots to make it rigid. If it hit something, the PLA would break but the TPU wouldn’t, then just insert a new PLA stick and good to go! Print a couple of them and you would be flying for a long time I would say. Still a very cool video as usual and loved that fall at 6:00 xD.
The Crusherr
holly crap
you bring me so often to hard laughing:DDD
Big thanks from Germany for this beautiful and interesting videos ! :))
Simat
1:39 “it’s also painted orange, so it fly faster”…
yes that make sense 😂
lucas nilsson
lät lite som Leif och Billy när du pratade med din ven.
lucas nilsson
mossa!!! hahhahaahah
Phillip Bekkevold
Its Moss in english
Jeff Curry
so where is the frame for us to print? is it on thingiverse somewhere, where is the link, want to try this one out…..
Scout FPV
Global Warming?????? What is that…..
TheChargedOne1
why dont you try this with carbon fiber filament?
Thegame Dr.
was the petg dry. it is very strong if dried properly. some brands are be5tter than others. had good luck with tecbears and some luck with sunlu. also fiberglass nylon, or carbon fiber nylon or petg.
maintank
Do you have a link to the frame files you’re using?
Fords4life 91
Mom’s spaghetti
pinnaka jhansi
can you make a 3d printed blackbird fighterjet
Crazy Pat 86
“this is not over!” – pulls out a giant lighter and fixes the drone! you are awesome!
ZAPIX
3D Printed Drone “That Can’t Break” *7:50* *HUM HUM* xD
Kimmie Kardesh
Fast Forward to 8:30 when he disclosed the material he was using
ripper
Hey dude would it be possible to send me your drawing file for your build so I can try my first print of a drone please?!?
murat demirtas
PP is PP Broom Filament ? same thing right ?
dakingyea VG
ill send it to u
Lilblueskies Youtube
ill send it to u
dakingyea VG
Lilblueskies Youtube
Antonio Giudice
have you tried polycarbonate already?
Aleksandr Filatov
7:40 omg i just cry =DDD
Ojaswi Jaiswal
Was that a Shark Tank reference at 2:57 … If yes Barabara is OUT
Ojaswi Jaiswal 4064
Was that a Shark Tank reference at 2:57 … If yes Barabara is OUT
Stuart Wallace
Can we get design for the print and or parts list etc. Thanks.
Vincenzo Memoli
I’m sorry. Red goes fasta.
TellmeNinetails
Who knew flex was the way to go.
Maarten Rouws
Maybe it helps when you do NOT hit a tree (:
kaedin bauer
How much would it be for me to get one of them 😳
Ishmael Maphingers
if you bought a f-ton of just about any stock the day after you filmed this, you wouldn’t need to film another youtube video ever again!
Noah Rutan
What motors do you use
josie Thomson aka Sawnae Bean
funniest fpv flight EVER!
SAWNEY BEAN
funniest fpv flight EVER!
OVOLVED 528
why do you think drone frames are strong and not flexible. it is because of the vibrations. Great video!
Temper Nova
6:00 Wow
Kevin Knight Photography
can you share the PP print settings?
ProDumbFPV
I’m glad you caught that on camera 😆
ProDumbFPV
Hey dude! I’m new to the hobby and not the smartest 😅 I bought a cc3d from China and was wondering if I can just plug it straight into betaflight and it will download the required data or do I have to do some flashing first? Thanks
augie
damn your LOS skill is very good
crybaby
damn your LOS skill is very good
ikhwe
can you make vd how to make the drone step by step
ikhwan
can you make vd how to make the drone step by step
Fayçal
Your friend is great .. he crashes with no trees at all wow
Cowboy FPV
I can’t remember what it’s called but there’s a process where the 3d print goes completely smoth mabey it’ll help with the layer delamination ✌️✌️✌️
Daniel Olivos Picardo
jajajajaja
SAND FISHING IN THE SOUTHWEST
Is that a personal frame you printed or is it acceptable for someone to duplicate it for personal use?
Muhamad Shahrizal
im from malaysia, can i know more details what material you used to make frame drone
PRATEEK DEY
What software you use for cc3d
SebastianR
I tried Fiberlogy PP and it didn’t last long. Also it was f*** hard to print. Now I’m trying nylon-pa12cf15. Wish me luck 😀
aluminumfetish
2:43 I suspect your shirt is on backwards.
Czech_ FPV
Why you not using googles
Julian
Any build files?
Pratyush Pro
use truss structures in the gap of the arms of the drone frame. The Truss structure may help in distributing the impact when crashed to any obstacle.
maintank
Hey can I get the STL for the frame you printed?
NoProb-Llama Woodcraft
What filament do you use?
morton upshot
On the plus side. if your frame is absorbing the shock, your components should better survive a crash
Sammy3D
Do you have a link for the frame .stl?
nitish chowdary
Make an 3d printed opening working model of iron man helmet
i hate the fact that his map has Alaska as a different color than the continental US… it makes it worse that they got HAWAII correct.
Me trying to get a girl: 08:39
oh my god why am i just discovering you!?? this is amazng
you’re hilarious
this dude did NOT get bored on quarantine.
Did you let the nylon cure? To be printable it needs to be dry but to have more impct resistance/flexibility it needs time to pick up water from the air.
I really liked the TPU aproach. I would probably explore that a little more. My idea would be to print the TPU frame but with slots along the arms and then print PLA (because its cheap) or a more rigid filament “flat sticks” to insert in those slots to make it rigid. If it hit something, the PLA would break but the TPU wouldn’t, then just insert a new PLA stick and good to go! Print a couple of them and you would be flying for a long time I would say. Still a very cool video as usual and loved that fall at 6:00 xD.
holly crap
you bring me so often to hard laughing:DDD
Big thanks from Germany for this beautiful and interesting videos ! :))
1:39 “it’s also painted orange, so it fly faster”…
yes that make sense 😂
lät lite som Leif och Billy när du pratade med din ven.
mossa!!! hahhahaahah
Its Moss in english
so where is the frame for us to print? is it on thingiverse somewhere, where is the link, want to try this one out…..
Global Warming?????? What is that…..
why dont you try this with carbon fiber filament?
was the petg dry. it is very strong if dried properly. some brands are be5tter than others. had good luck with tecbears and some luck with sunlu. also fiberglass nylon, or carbon fiber nylon or petg.
Do you have a link to the frame files you’re using?
Mom’s spaghetti
can you make a 3d printed blackbird fighterjet
“this is not over!” – pulls out a giant lighter and fixes the drone! you are awesome!
3D Printed Drone “That Can’t Break” *7:50* *HUM HUM* xD
Fast Forward to 8:30 when he disclosed the material he was using
Hey dude would it be possible to send me your drawing file for your build so I can try my first print of a drone please?!?
PP is PP Broom Filament ? same thing right ?
ill send it to u
ill send it to u
have you tried polycarbonate already?
7:40 omg i just cry =DDD
Was that a Shark Tank reference at 2:57 … If yes Barabara is OUT
Was that a Shark Tank reference at 2:57 … If yes Barabara is OUT
Can we get design for the print and or parts list etc. Thanks.
I’m sorry. Red goes fasta.
Who knew flex was the way to go.
Maybe it helps when you do NOT hit a tree (:
How much would it be for me to get one of them 😳
if you bought a f-ton of just about any stock the day after you filmed this, you wouldn’t need to film another youtube video ever again!
What motors do you use
funniest fpv flight EVER!
funniest fpv flight EVER!
why do you think drone frames are strong and not flexible. it is because of the vibrations. Great video!
6:00 Wow
can you share the PP print settings?
I’m glad you caught that on camera 😆
Hey dude! I’m new to the hobby and not the smartest 😅 I bought a cc3d from China and was wondering if I can just plug it straight into betaflight and it will download the required data or do I have to do some flashing first? Thanks
damn your LOS skill is very good
damn your LOS skill is very good
can you make vd how to make the drone step by step
can you make vd how to make the drone step by step
Your friend is great .. he crashes with no trees at all wow
I can’t remember what it’s called but there’s a process where the 3d print goes completely smoth mabey it’ll help with the layer delamination ✌️✌️✌️
jajajajaja
Is that a personal frame you printed or is it acceptable for someone to duplicate it for personal use?
im from malaysia, can i know more details what material you used to make frame drone
What software you use for cc3d
I tried Fiberlogy PP and it didn’t last long. Also it was f*** hard to print. Now I’m trying nylon-pa12cf15. Wish me luck 😀
2:43 I suspect your shirt is on backwards.
Why you not using googles
Any build files?
use truss structures in the gap of the arms of the drone frame. The Truss structure may help in distributing the impact when crashed to any obstacle.
Hey can I get the STL for the frame you printed?
What filament do you use?
On the plus side. if your frame is absorbing the shock, your components should better survive a crash
Do you have a link for the frame .stl?
Make an 3d printed opening working model of iron man helmet