FPV Long Range ASCENSION | TBS Crossfire01:31

That breathless feeling when ascending the mountain.

If you like it, please subscribe to my YouTube channel: http://bit.ly/davideFPVsub …thanks!

Mini quad used: setup 2
Action Cam: GoPro Session 5

My Custom FPV Goggle Headstrap | FOILENRABE: https://www.folienrabe.at/index.php?language=en

Mini-quad setup 1:
– Frame: Armattan Rooster 5”
– Motors: Armattan Titan 2306 / 2450Kv
– ESCs: 30A Armattan 2-6S (Dshot600)
– FC: CL Racing F4S All-in-one flight controller with Betaflight OSD (Betaflight 3.2.3, Dynamic Filter, PT1, No gyro notch filters, anti turtle on)
– VTX: Mini 200mw Aomway Stubby VTX
– TX: Frsky Taranis X9D SE Plus
– RX: FrSky 2.4GHz R-XSR with Telemetry and RSSI
– FPV Cam: Runcam Swift 2 – 2.5mm
– Antenna: Aomway Stubby 5.8G antenna set and ImmersionRC spiroNET 8 dbi
– Props: HQProp DP 5×4.3×3 PC V1S and Cyclone DALPROP T5045CR
– Battery: Tattu and Sectorbat (1300mah 4s 75c and 1550 4s 75c)
– FPV Goggles: Fatshark Dominator V3 (LaForge V2 diversity module)
– Action Cam: GoPro session 5
…5v buzzer and soft mounted FC.

Mini-quad setup 2 (TBS):
– Frame: Armattan Chameleon 5”
– Motors: Armattan Velvet 2206 / 2300Kv
– ESCs: 30A Armattan (Dshot600)
– FC: Omnibus F4FC with Betaflight OSD (Betaflight 3.2.4, Dynamic Filter, PT1, No gyro notch filters, anti turtle on)
– VTX: TBS UNIFY PRO V2
– TX: Frsky Taranis X9D Plus + TBS Crossfire Diversity
– RX: TBS Crossfire micro receiver V2 (Horizontal Polarization)
– FPV Cam: Runcam Swift 2 – 2.1mm
– Antenna: TBS Triumph set and ImmersionRC spiroNET 8 dbi
– Props: HQProp DP 5×4.3×3 PC V1S
– Battery: Tattu and Sectorbat (1300mah 4s 75c and 1550 4s 75c)
– FPV Goggles: Fatshark Dominator V3 (LaForge V2 diversity module)
– Action Cam: GoPro session 5
…5v buzzer and soft mounted FC.

Mini-quad setup 3:
– Frame: Armattan Chameleon 5 inch
– Motors: EMAX RS2306 2400KV
– ESCs: Racerstar RS30A V2 30A Blheli_S ESC (Dshot600)
– FC: SP Racing F3 (Betaflight 3.2, Dynamic Filter, PT1, No gyro notch filters, anti turtle on)
– VTX: TBS UNIFY PRO V2
– TX: Frsky Taranis X9D Plus
– RX: Frsky XM+ Micro D16
– FPV Cam: Runcam Swift 2 – 2.1mm
– Antenna: Aomway set and ImmersionRC spiroNET 8 dbi
– Props: DALPROP CYCLONE T5046C
– Battery: Tattu and Sectorbat (1300mah 4s 75c)
– FPV Goggles: Fatshark Dominator V3 (LaForge V2 diversity module)
– Action Cam: GoPro session 4
…soft mounted motors and soft mounted FC.

Backup setup:
– Frame: Eachine Wizard X220
– Motors: DYS SE2205 PRO 2300KV Race Edition
– ESCs: FAVOURITE LITTLEBEE-20A-S ESC BLHELI_S
– FC: SP Racing F3 6DOF (Betaflight 3.2, Dynamic Filter, PT1, No gyro notch filters)
– Props: DALPROP CYCLONE T5045C and GemFan 5152
– VTX: TS5828S 40CH 5.8G 600MW Boscam Skyzone Upgrade
– TX: Frsky Taranis X9D Plus
– RX: Frsky XM+ Micro
– FPV Cam: Foxeer HS1190 Arrow V2 2.5mm
– Antenna: AOMWAY 5.8G 3dBi set
– Battery: Sectorbat Graphene and Tattu 1300mah 4s 75c
– FPV Goggles: FatShark Dominator V3 (LaForge Pro V2 Diversity Module)
– Action Cam: GoPro session 4
…removed leds, 2x battery straps, 5v buzzer, soft mounted fc, soft mounted motors.