Descriptions:

Hawk280mm uses an all-in-one flight control system, compatible with the mainstream transmitters for example JR, Futaba.

Specifically chosen to run 2205 2300KV motors with 6 inch propellers, to reach exciting new speeds. Due to the use of extremely lightweight pure carbon fibre material and the all-in-one flight control system, allows for the flight weight to be as light as 360g without battery.

This means you will be able to accelerate quick off the mark, remarkably responsive and stable flight. The frame is of the X4 model, the diameter between the motors is 280mm. The thickness of the fuselage is only a meer 1.5mm, pure carbon fibre supports for lightweight but a strong structure. The arms all have a thickness of 3mm, also made from carton fibre.

Newly researched all-in-one flight control system includes the following functions:
4 x 20A speed controller ( Blheli oneshot settings installed)
Adjustable 32 channel 5.8G-600mW video transmitter
OpenPilot CC3D flight controller
Adjustable LED power output
Adjustable on / off echolocation device
5V or 12V FPV camera power and video output
Input power built in XT-60 socket

The all-in-one flight control system reduces the need for complicated soldering hence trimming down the weight of the wires resulting in extraordinary performance.

Components required for normal flight:
3 – 4S 1400-2300mAh LiPo Batteries ( flight time 5 – 9minutes )
At least 5 channels or above transmitter with mini receiver

Components requred for FPV flight:
At least 5 channels or above transmitter with mini receiver
21 x 21mm camera with 5V or 12V input
5.8G video output device with receiving capacity.

Specification

General

Type: 2-blade Propeller,Antenna,Back Arm,Body Shell,Camera,ESC,Flight Controller,Front Arm,Gyro,LED Light,Main Board,Multirotor Frame Set,Power Board,Upper Body Shell
Version: BNF

Flight Controller

Flight Controller Type: F1

Electronic Speed Controller

Functions: Oneshot125,Oneshot42
Continuous Current: 20A
Burst Current: 4 x 30A

Dimension and Weight

Package weight: 0.3700 kg
Package size (L x W x H): 37.00 x 16.00 x 28.00 cm / 14.57 x 6.3 x 11.02 inches

Package Contents

Package Contents: 1 x Quadcopter, 1 x CC3D Flight Controller, 4 × 2205 brushless Motors, 4 × 20A ESC, 4 × 6Propellers